Mobility Plus Co., Ltd. Developed an advanced useful power generation system of truck enginery.
Mobility Plus
HOME FAQ Contact us LINK Site Map
Promotion Video Now playing!
Pictures New update!
Examples of system application
Publication of the media
Kinds of tire service car Solution What is the True-G Procedure of delivery of cars Company
HOME „ Examples of True-G „ Proper rapid long body sliding door type
True-G long body sliding door type yfor large truck, medium truck and busz
      y 6150mm long in total 2190mm wide in total 4600mm long for the body z
The space extended left is compressed to the minimum limit, which makes its function as TB tire service car more complete. This is a car model thoroughly renovated and improved in the aspects of reliability, durability, body firmness, use flexibility and environmental protection. Eight members with two-year car inspection experience can be obtained.
Car data

Adopt electric compressor. Compared with engine compressor, it is more durable and quieter.
As it works in low operational state, so it is durable and clean.
Sound-insulation, over-floor or under-floor specification is available.
Stop when air pressure reaches 13.5kpa ` 14kpa and restart when air pressure reaches about 11kpa (intermittent operational mode)

Capacity of compressor
‡@ 7.5 horsepower (5,5KW) type maximum pressure 14kPa output
@@ about 565L /minute
‡A 10 horsepower (7,5KW) type maximum pressure 14kPa output
@@ about 730L /minute
Capacity of oil tank
260L ` 270L (installed under the floor)
The newly developed large-capacity alternator is installed in the engine room, which is different from the generator installed on the chassis engine. In addition, AVR unit, inverter, special control panel and accumulator are all installed in the compartment compactly.
Power generation and purpose
3-phase 200V: compressor, tire maintenance equipment, TB changer, PC changer
Single-phase 100V: balancer measuring part, air filler, lighting installation, electric tool, etc.

As True-G system is an aggregate of unit, so it can be configured separately in a space. As load can't be concentrated at a point, so the freedom of car design increases

It can carry two TB changers, two PC changers, two wheel balancers, two boosters and two jacks respectively, two air fillers and two hose reels with pressure adjustment function, power gate (TB changer can rise and descend), other lighting installation, caution light, etc.
Main tire maintenance equipments

TB changer
(front and rear sliding type)

PC changer
Motor compressor (produced by Fuji Compressor) of over-floor sound insulation specification
Motor compressor (produced by Fuji Compressor) of under-floor sound insulation specification
Booster jack
Air tank
True-G control unit
Air filler
Expansion diagram of proper rapid long body wing type
y specification of under-floor compressor z
y specification of over-floor compressor z
Mobility Plus Co. Ltd.