Mobility Plus Co., Ltd. Developed an advanced useful power generation system of truck enginery.
 
Mobility Plus
 
JapaneseEnglish
HOME FAQ Contact us LINK Site Map
Promotion Video Now playing!
Pictures New update!
Examples of system application
Publication of the media
Kinds of tire service car Solution What is the True-G Procedure of delivery of cars Company
 
HOME „ Examples of True-G „ Proper rapid long body wing type
 
True-G long body wing type yfor large truck, medium truck and busz
 
      y 6150mm long in total 2190mm wide 4600mm long for the body z
 
      
 
Characteristic
Adopt specially designed and electric wing body with only left side open. As each step for work should reach the front part, so it is well compatible with electric sliding TB changer and space for loading tire can be freely made. Compared with common double-side open wing, the hardness of body improves.
 
 
Car data
 
Compressor

Adopt electric compressor. Compared with engine compressor, it is more durable.
As it works in low operational state, so it is quiet and clean.
Sound-insulation specification, over-floor or under-floor specification is available.
Stop when air pressure reaches 13.5kpa ` 14kpa and restart when air pressure reaches about 11kpa (intermittent operational mode)

Capacity of compressor
‡@ 7.5 horsepower (5,5KW) type maximum pressure 14kPa output about
@@ 565L /minute
‡A 10 horsepower (7,5KW) type maximum pressure 14kPa output about
@@ 730L /minute
Capacity of oil tank
260L ` 270L (installed under the floor)
‚s‚’‚•‚…|‚f
The newly developed large-capacity alternator is installed in the engine room, which is different from the generator installed on the chassis engine. In addition, AVR unit (unit), inverter, special control panel, accumulator (battery) are all installed in the compartment compactly.
Power generation and purpose
3-phase 200V: compressor, tire maintenance equipment, TB changer, PC changer
Single-phase 100V: balancer measuring part, air filler, lighting installation, electric tool, etc.
¦

As True-G system is an aggregate of unit, so it can be configured separately in a space. As load can't be concentrated at a point, so the freedom of car design increases.

Equipments
carried
It can carry two TB changers, two PC changers, two wheel balancers, two boosters and two jacks respectively, two air fillers and two hose reels with pressure adjustment function, power gate (TB changer can rise and descend), other lighting installation, caution light, etc.
 
 
Main tire maintenance equipments
 

TB changer
(front and rear sliding type)

PC changer
Motor compressor (produced by Fuji Compressor) of over-floor sound insulation specification
Motor compressor (produced by Fuji Compressor) of under-floor sound insulation specification
Booster jack
Air tank
True-G control unit
Air filler
 
 
 
           
 
Expansion diagram of proper rapid long body wing type
 
y specification of under-floor compressor z
 
 
y specification of over-floor compresso z
 
Mobility Plus Co. Ltd.
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COPYRIGHT(C) 2008 MOBILITY PLUS. ALL RIGHTS RESERVED